FiberFlo® TF 1680
Hollow Fiber Cross Flow Filtration
FiberFlo TF 1680 Cartridges are constructed using unique polysulfon hollow fiber membranes available only from Mar Cor Purification. The TF Cartridge is available in 0.1 µm and 0.05 µm pore sizes; 0.2 µm and 0.45 µm pore sizes are available for pre-evaluation.
Ideal for separation and purification applications, polysulfon fibers feature a graded pore size structure with a “shell” on the inside of the fibers. Liquids, even those with varying viscosities, flow easily through the center of the fibers (inside the lumens) and the skin is resistant to contamination by materials in the liquids.
FiberFlo TF 1680 cartridges are suitable for use in pilot and small-scale production environments; stainless steel housing is required. TF 1680 cartridges have a significantly higher membrane surface area compared to small-scale laboratory capsules, also available from Mar Cor Purification; making them ideal for scaling from laboratory batch sizes to pilot and small production batch sizes.
Membrane Material: Polysulfone Hollow Fiber
Cartridge Cage Material: Polysulfone
Fiber Sealing Technology: Urethane Potting
Membrane Surface Area: 16.8 ft2 (1.6 m2)
Fiber Flow Path Length: 9.5” (24 cm)
Biosafety: All components meet or exceed USP Class Vl-121C plastic test
Oxidizable Substances: Permeation and Retention Meets USP XXIX requirements
Endotoxins: Less than 0.25 EU/m
Maximum Recommended Trans-Membrane Pressure at 25°C: 30 p.s.i
Maximum Continuous Operating Temperature, 200 Hours Total Exposure: 80°C
Air Diffusion (Lumen to Outer Lumen): 80cc/min @ 30ps